PanBlastTM AIN Water Induction Nozzles - Features & Benefits:
- Featuring the ability to slurry wet blast via both adjustable water feed and adjustable venturi air injector ports for optimum air/water atomization in the nozzle discharge and water suction capacity.
- The AIN Induction nozzles can
be simply utilized in place of any commercial / conventional blasting nozzle with no modifications to, or upgrading of, your standard blasting equipment required.
- Designed with a durable aluminum jacket and wear resistant tungsten carbide liner, standard 50mm (2" UNC) contractor threads to overcome nozzle freeze when fitting and removing nozzle from the nozzle holder.
- AIN induction nozzles will be available in all of the common industry sizes as follows:
- AIN 4 (1/4") - 6.4mm orifice - 25mm entry
- AIN 5 (5/16") - 8mm orifice - 25mm entry
- AIN 6 (3/8") - 9.5mm orifice - 25mm entry
- AIN 7 (7/16") - 11mm orifice - 25mm entry
- AIN 8 (1/2") - 12.5mm orifice - 25mm entry
- The AIN Induction nozzle has been engineered for optimal air/water atomization when compared to conventional wet blasting with water consumption levels (blasting pressure set @100psi) as follows:
- AIN 4 : 1.4 l/min to 1.9 l/min
- AIN 5 : 2.1 l/min to 2.3 l/min
- AIN 6 : 2.1 l/min to 2.5 l/min
- AIN 7 : 3.0 l/min to 3.3 l/min
- AIN 8 : 3.7 l/min to 3.9 l/min
- Standard fitment includes a short water connection line and on/off valve to allow the AIN induction nozzle to be utilized as a conventional dry blast nozzle or with the water on/off valve open for a high performance slurry wet blasting solution.
|
|
|
|
